|
| Home » Wren Turbines |
|
|
 |
|
 |
|
Statistics: Thrust 15.2kg (34lbs) Diameter 111mm (4.4in) Length 265mm (10.4in) Engine Weight 1440g (51oz) Autostart package contains: Engine with FOD screen Autostart ECU Hand Data Terminal Solenoid valves Pump Engine mount Gas and fuel pipes Gas bottle valve Gas connector Onboard gas tank Battery Operator's manual |
|
|
|
|
 |
|
Statistics: Thrust 45N (10lbs) Size 215mm x 75mm (8.5in x 3in) Weight 600g (21oz) Fuel Consumption 176ml / min (5.7oz / min) Flight Time 5.5 minutes full power on 950ml tank Autostart package contains: MW44 Gold Engine, with FOD screen MW44 Autostart ECU ECU Data Terminal ECU Battery Fuel and Gas Solenoids Fuel Pump Engine mount Gas Bottle valve (Europe only) Gas Connector Fuel and Gas Pipes Operator's Manual Statistics Thrust 45N (10lbs) Size 215mm x 75mm (8.5in x 3in) Weight 600g (21oz) Fuel ... more info |
|
|
|
|
 |
|
All engines have Electronic control units and and pump. The engine has the very best quality case of any turbine currently available. The stainless steel case and tailcone are turned from solid stainless steel. Anodised green fod guard is standard. The full autostart kit includes the autostart ECU and valves to control the gas and fuel at start up. Full autostart means there is on board gas supply if you want it, and valves that automatically open to allow gas and fuel at the appropriate point. ... more info |
|
|
|
|
 |
|
The engine develops approximately 8 kg and has an advanced diffuser system giving a high pressure ratio. It features a refined version of the well-proven MW54 combustion chamber. There is significantly more power than the standard MW54, with no increase in rpm, and the planes fly very much faster. The engine is very easy starting and has performed flawlessly during extensive testing in fully ducted and part-ducted installations and also mounted externally. The high case pressure and consequent ... more info |
|
|
|
|
 |
|
Mk 3 Turbo prop for Graupner Raven (Feb 05) We have developed a new version of the turboprop for the Graupner Raven using the same engine mounts provided in the Graupner kit. Jason Fletcher has received the first of these new units and will be fitting it to the Graupner plane. The unit has a new exhaust, the new fod screen intake. We have taken the opportunity to revamp the size of the prop shaft and gears to take more power later. The unit runs very cool, the unit below was run for 15 minutes ... more info |
|
|
|
|
|
|
|
|
