Part No: JCP160

JetCat P160 SX turbine complete with starter includes:

6 lbs more thrust than the P120
Jet-tronic ECU (fuel control electronics)
GSU (Display and Programmer)
LED I/O board
Miniature fuel pump
Electronic starting gas valve
Electronic Fuel valve
Fuel tubing, tubing connector set, filters, and cable set
6 cell, 1250mA battery pack
Starting gas tank
Turbine mounting clamp, RamTec compatible
Detailed instruction manual

Thrust: 160N / 34 lbs @ 125,000 RPM

Weight: 1300g / 3.1 LB

Diameter: 112mm / 4.4 inches

RPM Range: 33,000 - 125,000 RPM
Exhaust gas temp.: 660°C

Fuel consumption: 510ml / 16 oz per/min at full power

Fuel: Jet A1, 1-K kerosene

Lubrication: approximately 5% synthetic turbine oil in the fuel

P160 Thrust Chart

RPM Thrust
32,000 1.0
100,000 19.0
105,000 22.0
115,000 28.5
120,000 31.8
123,000 34.0

The values are approximate and can vary slightly from engine to engine.
Values at Standard Temperature and Pressure.