Part No: JCP120

JetCat P-120 turbine complete with starter includes:

Jet-tronic ECU (fuel control electronics)
GSU (Display and Programmer)
LED I/O board
Miniature fuel pump
Electronic starting gas valve
Electronic Fuel valve
Fuel tubing, tubing connector set, filters, and cable set
6 cell, 1250mA battery pack
Starting gas tank
Turbine mounting clamp, RamTec compatible
Detailed instruction manual


Thrust: 120n / 28 lbs @ 123,000 RPM
Weight: 1300g / 3.1 LB

Diameter: 112mm / 4.4 inches

RPM Range: 33,000 - 123,000 RPM
Exhaust gas temp.: 580°C

Fuel consumption: 350ml / 12oz/min at full power

Fuel: Jet A1, 1-K kerosene

Lubrication: approximately 5% synthetic turbine oil in the fuel


P120 Thrust Chart

V4.0-5.0 ECU with a maximum of 123K RPM allowable in the limits menu. Thrust
33,000 1.0
82,000 9.5
90,000 12.0
92,500 13.0
98,500 15.0
103,500 17.0
105,500 18.0
111,000 20.0
115,000 22.0
119,000 24.0
121,000 26.0
123,000 28.0

The values are approximate and can vary slightly from engine to engine.
Values at Standard Temperature and Pressure.