Part No: JCP80

JetCat P-80 turbine complete with starter includes:

Jet-tronic ECU (fuel control electronics)
GSU (Display and Programmer)
LED I/O board
Miniature fuel pump
Electronic starting gas valve
Electronic Fuel valve
Fuel tubing, tubing connector set, filters, and cable set
6 cell, 1250mA battery pack
Starting gas tank
Turbine mounting clamp, RamTec compatible
Detailed instruction manual

Thrust: 82N / 20 LB @ 120,000 RPM

Weight: 1300g / 2.9 LB, incl. starter

Diameter: 112mm / 4.4 inches

RPM Range: 35,000 - 117,000

Exhaust gas temp.: 580°C

Fuel consumption: 230ml / 9 oz per/min at full power

Fuel: Jet A1, 1-K kerosene

Lubrication: approximately 5% synthetic turbine oil in the fuel

P80 Thrust Chart

RPM / Thrust
35,000 0.8
85,000 8.0
93,000 10.0
101,000 12.5
110,000 15.0
117,000 17.0
118,000 18.0
120,000 20.0