Part No: JCP70

JetCat P-70 turbine complete with starter includes:

Jet-tronic ECU (fuel control electronics)
GSU (Display and Programmer)
LED I/O board
Miniature fuel pump
Electronic starting gas valve
Electronic Fuel valve
Fuel tubing, tubing connector set, filters, and cable set
6 cell, 1250mA battery pack
Starting gas tank
Turbine mounting clamp, RamTec compatible
Detailed instruction manual

Thrust: 71N / 17.5 LB @ 123,000 RPM

Weight: 1200g / 2.6 LB, incl. starter

Diameter: 97mm / 3.7 inches

RPM Range: 35,000 - 123,000

Exhaust gas temp.: 650°C

Fuel consumption: 205ml / 8 oz per/min at full power

Fuel: Jet A1, 1-K kerosene

Lubrication: approximately 5% synthetic turbine oil in the fuel


P70 Thrust Chart:

RPM Thrust
38,000 0.75
93,000 8.0
101,000 10.0
107,000 12.0
113,000 14.0
118,000 16.0
123,000 17.5

The values are approximate and can vary slightly from engine to engine.
Values at Standard Temperature and Pressure.